Step 2 test the driver module – HighPoint RocketRAID 2310 User Manual

Page 69

Text mode
Original mode

FreeBSD Driver Support

For FreeBSD 5.x:

# mdconfig –a –t vnode –f freebsd_5.x.img –u 0

# mount /dev/md0 /mnt

# cp /mnt/rr2310-xxx.ko /boot/kernel/rr2310.ko

# umount /mnt

# mdconfig –d –u md0

Step 2 Test the Driver Module

Test the driver module to ensure that it works with the system, by loading it during
bootup. If the module has been loaded successfully you should see the RocketRAID
2310 banner and a display screen of the attached drives. You can now access the
drives as a SCSI device.

Note: If you have no other SCSI device, the first device is /dev/da0, then /dev/da1,
etc.).

Example: F1 FreeBSD

Default: F1

>> FreeBSD/i386 BOOT

Default: 0:ad(0,a)/boot/loader

boot:

BTX loader 1.00 BTX version is 1.01

Console: internal video/keyboard

BIOS driver A: is disk0

6-6