HighPoint RocketRAID 2310 - Manual (Page 27)

RocketRAID 2310 Driver and Software Installation
Logging On
The RAID Management Console requires that a user (or Administrator) log on. The
software is incapable of working with RAID arrays or hard disks attached to the
RocketRAID 2310 until the user has logged on.
Default Parameters:
System Address: 127.0.0.1
Port: 7402
User Name: RAID
Password: hpt
Note: The password and user name fields are case sensitive.
The first time the software is used, make sure to enter the information listed above.
After successfully logging on, the software will ask you to alter the password (as a
security precaution).
Enter a password, and press enter.
4-6