HighPoint RocketRAID 4310 User Manual
Page 47
HighPoint RAID Management and Device Driver CD
Red Hat Enterprise/CentOS, Fedora Core, Open SuSE – Installing
the Web-based Management utility
Linux operating systems that support .rpm packages, allow you to double-click the
HighPoint Web RAID Management .rpm file to start the installation process.
1.
Copy the Web RAID Management package from the RocketRAID 431x/432x
Software CD, to the desktop of the Linux operating system. The .rpm file is
located in HighPoint RAID Management Software – RR3xxx_4xxx - Linux –
WebGui-Linux.tbz.
2. Extract the .tbz file to the desktop, and browse to the appropriate .rpm file (there
are 32 and 64-bit options).
3.
Double click the .rpm file – this should open the operating systems’ software
installer. Enter the Administrative password when prompted and proceed with
installation.
4.
The package can also be installed manually, using a terminal. Lon in as “root”,
open a terminal, and browse to the location of the .rpm file. Run the following
command:
5.
# rpm -i hptsvr-https-1.4-8.i386.rpm (or hptsvr-https-1.4-8.x86_64.rpm)
Note: The i386 rpm package can also work on 64-bit systems if you have 32-bit
runtime libraries installed. If you use the x86_64 rpm package, please make sure the
controller driver has 64-bit ioctl support.
47