HighPoint RocketRAID 4310 - Manual (Page 19)

RocketRAID BIOS Utility
To log on as a User, use the arrow keys to highlight “User mode”, and press Enter.
To log on as Supervisor, select “Supervisor Mode”:, and press Enter.
BIOS Menu Shortcuts
The BIOS interface can also be navigated using key stroke combinations (Alt +” X”).
When viewing the interface, letters highlighted in “red” represent the “X” values:
“S” – System
“D” – Disk
“A” – Array
“C” – Controller
“W” – Window
“H” – Help
“X” - Exit
Logging In
The BIOS Utility has two interface modes: User and Supervisor
The User mode can only view information about the RocketRAID card, disks and
arrays.
The Supervisor mode is used to create/delete arrays, and configure RocketRAID
related settings. Supervisor mode requires a password – this is the same password
that you will need in order to use the Web Management interface.
Press F10 – this should bring you to the “System” toolbar command. Press Enter.
19