HighPoint NA762TB - Manual (Page 9)

HighPoint Technologies Inc. 9
Unzip the package and double-click the “HighPoint WebGUI” icon to install WebGUI.
You’ll be asked to input system administrator’s password to complete installation.
After installation is complete, a WebGUI icon will be displayed on desktop screen.
Double-click this icon to open the WebGUI. The system’s default web browser will
open a login page. To login, use the default user name: RAID and password: hpt.
6. Configuring RAID Arrays
6.1 Configuring RAID Arrays
The NA762TB RAID controller supports multiple RAID levels. The steps below describe how to
quickly configure a RAID5 array.
step 1. Verify the physical device status.
Click the Physical tab to make sure all of the HDD’s are detected. Each drive will be
designated as Device 1-N, where N refers to the disk module number. Click device
icon, it will display detail device information. If any of the disks are not detected,
check the corresponding disk module and make sure the drive is securely installed
(see page 6 for more information).