HighPoint NA762TB - Manual (Page 27)

HighPoint Technologies Inc. 27
User can select how many disks to construct the array or click this “select all” to use all HDDs for
the array creation.
H. Capacity
This allows users to define how much disk capacity will be used. If “maximum” is chosen, then it
means use all calculated available disk space.
After the array has been created, it will be displayed under “Logical Device Information” (4.3).
The following information is displayed for each logical device:
Name: Default name of the RAID array
Type: Type of RAID array
Capacity: Total capacity of the RAID array
Cache Policy: Redundant RAID array options for performance or protection
Block Size: RAID array block size
Sector Size: RAID array sector size
OS Name: Name of HDD seen in the OS
Status: Status of RAID array. Other option include (Normal, Critical,
Disable, Rebuilding, Verifying)
Array Maintenance: Maintenance provides a selection of general maintenance features and
options for the selected array:
1. Diagram 1: Array is in “Normal” Status