2 connecting the na762tb to a mac system, 3 install the software for na762tb – HighPoint NA762TB User Manual
Page 7
HighPoint Technologies Inc. 7
5.2 Connecting the NA762TB to a Mac System.
step 1. Connect the NA762TB to the host system with the
Thunderbolt™
cable, and then connect
the NA762TB with a power source.
step 2. With the power cord connected to the power source, turn on the NA672TB using the power
switch on the rear panel (switch to the “I” position to power on the NA762TB).
Note: The NA762TB is designed to be powered on and powered off simultaneously with the HOST
system, when the NA762TB is connected to the HOST system with the
Thunderbolt™
cable. Therefore,
power on HOST first – the NA762TB will automatically power on. (NA762TB supports hot-plug and
hot-unplug for powering-on and powering-off)
5.3 Install the software for NA762TB
1) Driver installation.
step 1. Driver Installation.
Please visit
for the latest
driver package. Once downloaded, unzip the package, and follow the procedure
below:
a. Double-click the “uninstall.command” script file to uninstall the currently installed
driver.
b. Double-click the “HighPointIOP.mpkg” icon to install the driver package. You will
be asked to input the administrator’s password in order to complete this. Once