HighPoint NA762TB - Manual (Page 15)

HighPoint Technologies Inc. 15
7. Deleting RAID Storage
To delete a RAID array:
1) Log-in to the WebGUI.
2) Switch to the Logical tab.
3) Locate the RAID array that you wish to delete.
4) Click the Maintenance link to the right of the RAID array.
5) Click the Delete button from the Array Maintenance pop up window.
6) Confirm the deletion by click OK button.
Note: All data on the selected RAID array will be deleted after you confirm this selection.
8. RAID Disk Failure Recovery
The NA762TB’s RAID controller continually monitors the health of each of the disk drives. In the event of a disk
failure, an audible alarm will sound. The web GUI will also report the failed drive and its physical position.
NOTE: For redundant RAID arrays (RAID 1, 5, 6, 10 or 50), a drive failure does not result in data loss. However,
the array is now in an unprotected state and the failed drive should be replaced as soon as possible to avoid
data loss.