HighPoint NA762TB User Manual
Page 8
HighPoint Technologies Inc. 8
complete, you will be asked to reboot the system. Confirm the prompt to
proceed.
step 2. Verifying driver installation.
After the driver has been installed and the system rebooted, verify the NA762TB
device status using OS X System Information pane.
To verify the NA762TB driver status;
Click the Apple icon on top left of the screen, and select About This Mac, and then
select More Info. Next, select System Report, and click PCI Cards on left side of the
System Information pane. The Driver Installed entry for controller pci1103, 4520
should be “Yes”
2) RAID Management software installation.
All hard disks installed into the NA762TB will be configured as single drives by default, and
will be recognized by OS X Disk Utility. In order to configure RAID array you will need to install
the Web RAID Management software (also known as the WebGUI).
step 1. WebGUI Installation
Download and install the RAID Management software from the NA762TB product
page
:
step 2. Running the WebGUI