HighPoint NA762TB - Manual (Page 32)

HighPoint Technologies Inc. 32
sector events. If bad sectors are found, we recommend first
contacting the HDD manufacturer, then technical support, for
further advice.
C. Enable audible
alarm: When a disk goes off-line the beeper on the RAID controller will
sound.
D. Set Spindown Idle
Disk (Minutes): Hard drives can be instructed to spin down when there is no disk
activity for a set period of time. You are free to specify the interval
– from 10 to 240 minutes.
E. Restrict to localhost
access: This option is used to restrict WebGUI access to the local system
and not allowing remote access.
F. Set Rebuild Priority: When rebuilding a critical RAID array, there are five rebuilding
options to choose from. Each rebuild priority will affect the
rebuild completion time.
 Lowest
Lowest Priority when rebuilding arrays. System resources will
be assigned to all other tasks first.
 Low
Low Priority. Most of the system’s tasks have priority over the
rebuild procedure.
 Medium
Medium Priority is the default option – system resources are
equally distributed between the rebuild procedure and other
system tasks.
 High
High Priority – the majority of available system resources will
be directed towards the rebuild procedure.