Vaisala GMW90 - Manual (Page 18)

User's Guide _______________________________________________________________________
16 ___________________________________________________________________ M211659EN-B
1201-005
Figure 3 Opening the Transmitter
1 = Push tab down with a screwdriver to open the transmitter.
To open, use a screwdriver to push down the tab that holds the
transmitter cover and mounting base together. Pull the mounting base
away from the cover, starting from the top.
To close, connect the bottom of the transmitter first, and tilt the top
forward to close the tab. Do not push on the display. Closing the
transmitter starts it up if power is supplied to the screw terminals.
CAUTION When opening or closing the transmitter, avoid damaging the transmitter
electronics with the two plastic supports on the mounting base.
1