Purge interval, Device information, Figure 17 – Vaisala DM70 User Manual
Page 43
Chapter 5 _____________________________________________________________ User Interface
The default values are 28.96 for DMP74A/B (air) and 146.06 for
DMP74C (SF6).
Purge Interval
The time interval at which the automatic sensor purge is performed
can be changed between 1 ... 48 hours. For instructions, refer to
section Changing Automatic Sensor Purge Interval on page 30.
Device Information
0403-040
Figure 17
Device Information
Basic information about the indicator and the probe is found as
follows:
1.
Open the menu by pressing
Open.
2. Select
Settings and press
.
3. Select
Device information and press
Show.
4.
The first display gives the information on the MI70 indicator.
For details on the probe, press
More and then press
OK.
5.
To return to the basic display, press
Exit.
VAISALA _______________________________________________________________________ 41