Vaisala DM70 - Manual (Page 34)

USER'S GUIDE____________________________________________________________________
You can also change one of the shortcut keys to refer to the sensor
purge. See section Program Shortcut Keys on page 38.
Calibrate Transmitters (used only
with DMP248)
In this menu, you can set the baud rate, serial format, and start
calibration. For details, refer to Chapter 6, Field Calibration Check of
Fixed Transmitters, on page 43.
Figure 11 Calibrate Transmitters Display
Recording/Viewing Menu
Recording Data
0403-043
Figure 12 Recording
You can record measurement data and view it on the display. Do the
following:
1. Press Record or open the menu and select
Recording/Viewing.
2. Select Record data and press .
32 __________________________________________________________________ M010091EN-F