Monoprice 8745 Wireless N PoE Access Point - Manual (Page 65)

61
Chapter 5 SNMP Setting
5.1 SNMP Introduction
The Simple Network Management Protocol (SNMP) is
widely used in local area networks (LANs) for collecting
information, managing, and monitoring network
devices, such as servers, printers, hubs, switches, and
routers. Specialized software in each SNMP capable
device, known as an Agent, continuously monitors the
status of the device and reports the results to the
SNMP Manager software, which can then act on the
report. The MW300A supports both SNMP v1 and
SNMP v2c.
5.2 SNMP Configuration
Click SNMP Setting in system menu to obtain the
following screen: