Monoprice 8745 Wireless N PoE Access Point - Manual (Page 45)

41
disabled, another wireless device must
specifically enter the SSID to make a
connection. Since the P2P/P2MP mode is not
intended for use by normal wireless clients, it
may be best to disable this feature.
 BSSID: Basic Service Set Identifier for the
wireless network. In IEEE802.11, BSSID is
the MAC address of wireless access point.
 Channel: Specifies the effective channel
(from 1 to 13 or Auto) of the wireless
network. Each wireless device on the same
wireless frequency should use a different
channel. In most cases the Auto function will
ensure there is no conflict between devices.
 Extension channel: To increase the data
throughput of the wireless network when in
11n mode, the extension channel range is
used.
 Wireless Distribution System (WDS)Setting
 Encryption Type: Select the type of data
encryption method to use: WEP, TKIP, AES,
or NONE. The default is NONE.