Monoprice 8745 Wireless N PoE Access Point - Manual (Page 23)

19
communicate with PC3.
 AP Isolation: This feature is designed to
isolate communications between clients
using different SSIDs. When this feature is
enabled, each of your SSIDs will operate as if
it is a virtual network of its own and PCs on
one SSID will not be able to communicate
with PCs on the other. For example,
configuring the main SSID as AP1 and the
minor SSID as AP2: PC1 and PC2 are
connected to AP1, while PC3 connects to AP2.
PC1 and PC2 can communicate with each
other, but neither can communicate with
PC3.
Tip: If you want to isolate all connected
wireless client's communication, enable both
MBSSID AP Isolation and AP Isolation.
 BSSID: Basic Service Set Identifier for the
wireless network. In IEEE802.11, BSSID is
the MAC address of wireless access point.
 Channel: Specifies the effective channel
(from 1 to 13 or Auto) of the wireless
network. Each wireless device on the same