Monoprice 8745 Wireless N PoE Access Point - Manual (Page 64)

60
 Bandwidth ： Displays the bandwidth (20MHz or
40MHz) of the currently connected wireless client.
4.6 PING
Use the Ping function check connectivity. If the
connecting device has established connection with the
AP, the result will show connected, otherwise it will
display destination host unreachable. Select Wireless
Settings->Ping to obtain the following screen:
Explanation：
 IP Address: Enter the device’s IP address.
 Ping: Click the Ping button to test the
connectivity. If the result is host unreachable,
click the Diagnose button to perform basic
troubleshooting.