Monoprice 8745 Wireless N PoE Access Point - Manual (Page 58)

54
Setting Explanations：
 BG Protection Mode: Determines whether the
legacy mode protection mechanisms are enabled
or not. The default mode is Auto.
 Basic Data Rates: In terms of different
requirements, you can select one of the suitable
Basic Data Rates from the drop-down menu. The
default value is (1-2-5.5-11Mbps). It is
recommended not to modify the default value.
 Beacon Interval: The frequency interval (in
milliseconds) of the beacon, which is a packet
broadcast by the AP to synchronize a wireless
network. The default value is 100 ms. In cases of
poor reception, lowering the value may improve
connectivity.
 Fragment Threshold: The fragmentation
threshold defines the maximum transmission
packet size in bytes. If the data is larger than the
threshold setting, it will be split into multiple
packets. The default size is 2346 bytes and it is
best to leave it at the default. If you experience a
high packet error rate, you may slightly increase
this value. Only minor modifications of this value
are recommended. A value too low will result in
poor network performance.