Monoprice 8745 Wireless N PoE Access Point - Manual (Page 13)

9
Chapter 3 Web Configuration
3.1 Web Login
Connect your computer to the MW300A using a
network cable. Set your PC's IP address to
192.168.0.x (x ranges 2-253) and the subnet mask to
255.255.255.0. Please refer to Appendix II for
additional details on the TCP/IP setting.
Launch Internet Explorer or another web browser. In
the address bar, enter the AP’s default IP address,
192.168.0.254, then press the Enter key. The login
screen will appear.
Enter admin into both the user name and password
fields. After logging into the Web-based management
interface, you can set a new user name and password
on the System Tool – Change password tab.