Monoprice 8745 Wireless N PoE Access Point - Manual (Page 46)

42
WEP Encryption Description
 WEP Key1~4: Set the WEP keys using
either ASCII or Hex characters. You can use 5
to 13 ASCII characters (illegal characters,
such as “/” are not allowed) or 10/26 hex
characters (0-9 and A-F).
 Default Key: Select one of the four
configured keys as the currently active key.
TKIP Encryption Description
 Pass Phrase: Enter 8-63 ASCII characters
to serve as the pass phrase.
AES Encryption Description
 Pass Phrase: Enter 8-63 ASCII characters
to serve as the pass phrase.
 AP MAC Address: Input the MAC addresses
of up to four remote access points manually
or scan for them and select them from the list
of available APs.
MAC Address 1-4: Input each AP's MAC
address.
 Open Scan: Initiates a scan to obtain a list of
available remote AP MAC addresses. Select
one of the addresses from the list and click