Monoprice 8745 Wireless N PoE Access Point User Manual
Page 61
57
PBC (Push-Button Configuration) and PIN code.
PBC: Select the PBC option or press and hold the
WPS button on the front panel of the device for
about one second until the WPS indicator is
blinking. It will blink for 2 minutes, during which
time you can direct another device to initiate an
authentication procedure. The WPS function can
support connections for up to 32 clients at a time.
After two minutes the WPS indicator will turn off.
If more clients need to be added, repeat the
above steps.
PIN: If the PIN option is chosen, you will need to
enter an 8-digit PIN code. Wireless clients will
need to enter the PIN code to establish a
connection.
WPS summary: Displays the current status of
the WPS functionality.
Note ： Press and hold the WPS/Reset button for 1
second on the front panel to initiate the PBC process.
Pressing the button for 7 seconds will reset the device
to the default settings.