GReddy TURBO KITS: Mazda RX-8 2003 / T618Z User Manual

Page 13

6. Secure C-5 bracket to the speed sensor

harness bracket (LH).

(Parts Used #11, 12, 13, 34, 35, 37, 41, 42, 56)

7. Reinstall the front stabilizer bar.

3-6 Airinx Installation

1. Install the suction pipe S-1 tot he S-2 using the

provided hose and hose band.

Secure the S-1 bracket with the ground wire

mounted to the body.

(Parts Used #6, 34, 41, 50)

2. Trim the shaded area of the factory air cleaner

insulator as shown.

3. Remove the top housing and the filter of the

Airinx by removing the top screw off. Install

the hose adapter and 10

∅

-M18 fitting on to the

Airinx. Make sure that the hose adapter is

properly install on the Airinx frame.

(Parts Used #15, 16)