Actron KAL9640B - Manual (Page 47)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 13
Global OBDII Diagnostics
4
Press BACK key twice to return to
OBDII Function List.
✓
Scan tool can maintain only one recording at a time. Make sure to
thoroughly review old recording before erasing.
Scan tool recording time varies. A
recording consists of 5 frames of data
prior to trigger and several frames after
trigger. The amount of PIDs recorded
determine number of frames.
After recording, Scan Tool displays a
prompt to playback recording. Answer
NO to return to OBDII Function List.
Answer YES to display recorded data. Refer to “Playback” on page 4-16 for
description of function.
VEHICLE INFO
The Vehicle Info function allows scan tool to request vehicle’s VIN number,
calibration ID(s) which uniquely identifies software version in vehicle control
module(s) and Calibration Verification Numbers (CVN(s).
This function applies to model year 2000 and newer OBDII compliant vehicles.
Scan tool cannot verify if data returned is correct for scanned vehicle. This
information is provided by vehicle manufacturer.
Calibration Verification Numbers (CVNs) are calculated values required by OBDII
regulations. CVNs are reported to determine if emission-related calibrations have
been changed. Multiple CVNs may be reported for a control module.
✓
The calculation may take several minutes first time CVNs are requested.
Waiting For Trouble
Code To Trigger The
Start of Recording
BACK To Exit ~
**Recording Data*
FRAME: 14 of 29
Press ENTER to Stop ~
Playback Data?
NO ~