Actron KAL9640B - Manual (Page 38)

Global OBDII Diagnostics
4 – 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
PENDING CODES
Pending Codes are also referred to as “continuous monitor” and “maturing
codes”. An intermittent fault causes computer to store a code in memory. If fault
does not occur within 40 warm-up cycles, code clears from memory. If fault
occurs a specific number of times, code matures into a DTC and MIL lights or
blinks. This function can be done with KOEO or KOER.
Select Pending Codes and press
ENTER key.
Scan Tool displays Pending DTCs or a message stating SYSTEM PASS: NO
FAULT DETECTED.
Use DOWN arrow key to view DTCs or
press BACK key to return to OBDII
Function List. If these tests show a
fault, DTCs display in same format as
Read Codes. Use UP/DOWN arrow
keys to view pending DTC(s).
Press BACK key to return to OBDII Function List.
OBDII Function List ?
1)I/M Readiness
2)Read Codes
[
` 3)Pending Codes ~
DTCs Found: 2
Use [ To View DTCs
Write Down Codes
For Reference
~
System Pass:
No Faults Detected.
~
P0115 Mod$10 1/2
Engine Coolant Temp
Circuit Malfunction [
~