Telenav for T-Mobile Supported Devices: v5.5 for Android devices - Manual (Page 65)

If you have not yet set your Navigation Audio Preferences in Tools & More and are on a navigation screen when you
receive a call, you will not hear any navigation prompts during the phone call, but the prompts will be resumed after you
hang up.
NOTE: When TeleNav briefly uses the data network, incoming calls may be blocked. When you are on an incoming
call, TeleNav is still running and will periodically collect a GPS fix from the internal GPS receiver. When this fix is taken,
there may be a very brief loss of intelligibility on the received audio from the caller.
Interruption of Other Services
Whenever TeleNav GPS Navigator needs to contact its servers (such as when generating a route), it uses your carrier’s
data service. When TeleNav GPS Navigator uses your carrier’s data service, other services such as SMS messaging
and conventional cellular calls are not available. Typically, this interruption of other services lasts no more than 20
seconds.
When incoming calls are blocked due to TeleNav GPS Navigator’s use of your carrier’s data network, phone calls go to
your voice mail if you have a voice mail service available.
12. Changing your PIN number
1. In an Browser go to the TeleNav Web site at www.telenav.com and click on “My TeleNav.”
2. Enter your phone number and PIN to log in.
3. Select the “Change My PIN” Number link.
4. Enter your current PIN number and your new PIN number.
5. Click Submit.
NOTE: You can find your current PIN number by selecting Tools & More >> About >> Your PIN Number:
© TELENAV, INC. 2003-2009 PAGE 65 OF 71