CMP TMC2 User Manual

Cable connector, Cable connector type tmc2 type tmc2

INSTALLATION INSTRUCTIONS FOR

CABLE CONNECTOR TYPE TMC2

CMP TYPE TMC2 CABLE CONNECTOR FOR USE WITH INTERLOCKED & CORRUGATED CONTINUOUSLY

WELDED METAL CLAD (TYPE MC OR MC-HL) OR TECK ARMORED AND ARMORED & JACKETED CABLES

IN ORDINARY, WET & HAZARDOUS LOCATIONS.

INCORPORATING EC DECLARATION OF CONFORMITY TO DIRECTIVE 94/9/EC

0518

Glasshouse Street • St. Peters • Newcastle upon Tyne • NE6 1BS

Tel: +44 191 265 7411 • Fax: +44 191 265 0581

E-Mail: [email protected] • Web: www.cmp-products.com

Notified Body: Sira Certification Service, Rake Lane, Chester CH4 9JN, England.

I, the undersigned, hereby declare that the equipment referred to herein conforms to the requirements of the ATEX Directive 94/9/EC and the

following standards:-

EN60079-0:2009, EN60079-7:2007, EN60079-21:2009, BS 6121:1989, EN50262:1998 (Amd 2001), EN61241-0:2006, EN61241-1:2004

Dr Geof Mood - Technical Director - (Authorised Person)

DUBAI

• HOUSTON • NEWCASTLE • SINGAPORE • SHANGHAI • PUSAN • PERTH

www.cmp-products.com

tio

Logo’s shown for illustration purposes only. Please check certification for details

CABLE CONNECTOR

TYPE TMC2

Order Reference

Entry Thread

Min

Thread

Length

Cable Armor

Diameter

Cable Jacket

Diameter

Across

Flats

Across

Corners

Nominal

Assembly

Length

Approx Weight

Aluminium

(Ozs)

Aluminum

NP Brass

S. Steel

NPT

Option

Min

Max

Min

Max

TMC2-050A075 TMC2-050NB075 TMC2-050SS075

1/2”

0.78

0.42

0.63

0.50

0.75

1.20

1.30

1.65

2.29

TMC2-075A075 TMC2-075NB075 TMC2-075SS075

3/4”

0.80

TMC2-050A099 TMC2-050NB099 TMC2-050SS099

1/2”

0.78

0.60

0.89

0.69

0.99

1.48

1.60

1.97

3.00

TMC2-075A099 TMC2-075NB099 TMC2-075SS099

3/4”

0.80

TMC2-075A118 TMC2-075NB118 TMC2-075SS118

3/4”

0.79

1.10

0.87

1.18

1.81

1.95

2.13

5.11

TMC2-100A118 TMC2-100NB118 TMC2-100SS118

1”

0.98

TMC2-100A137 TMC2-100NB137 TMC2-100SS137

1”

0.98

0.94

1.28

1.02

1.37

2.05

2.21

2.34

6.70

TMC2-125A137 TMC2-125NB137 TMC2-125SS137

1-1/4”

1.00

TMC2-125A162 TMC2-125NB162 TMC2-125SS162 1-1/4”

1.00

1.22

1.50

1.30

1.62

2.36

2.55

2.44

8.82

TMC2-150A162 TMC2-150NB162 TMC2-150SS162

1-1/2”

1.06

TMC2-125A190 TMC2-125NB190 TMC2-125SS190

1-1/4”

1.03

1.49

1.72

1.57

1.90

2.56

2.79

2.44

9.45

TMC2-150A190 TMC2-150NB190 TMC2-150SS190

1-1/2”

1.06

TMC2-150A200 TMC2-150NB200 TMC2-150SS200 1-1/2”

1.06

1.57

1.88

1.65

2.00

2.75

2.97

2.60

11.06

TMC2-200A200 TMC2-200NB200 TMC2-200SS200

2”

1.57

TMC2-150A233 TMC2-150NB233 TMC2-150SS233 1-1/2”

1.06

1.79

2.21

1.91

2.33

2.95

3.19

2.64

12.77

TMC2-200A233 TMC2-200NB233 TMC2-200SS233

2”

1.57

TMC2-200A272 TMC2-200NB272 TMC2-200SS272

2”

1.57

2.14

2.61

2.27

2.72

3.54

3.82

2.76

24.69

TMC2-250A272 TMC2-250NB272 TMC2-250SS272

2-1/2”

1.57

TMC2-300A325 TMC2-300NB325 TMC2-300SS325

3”

1.63

2.49

2.97

2.62

3.25

4.33

4.68

3.46

42.68

TMC2-350A325 TMC2-350NB325 TMC2-350SS325

3-1/2”

1.68

TMC2-350A376 TMC2-350NB376 TMC2-350SS376 3-1/2”

1.68

2.95

3.54

3.16

3.76

4.84

5.23

3.68

53.44

TMC2-400A376 TMC2-400NB376 TMC2-400SS376

4”

1.73

TMC2-400A425 TMC2-400NB425 TMC2-400SS425

4”

1.73

3.52

3.94

3.70

4.25

5.23

5.65

3.89

59.19

All dimensions in inches

TECHNICAL DATA

CABLE CONNECTOR TYPE

: TMC2

INGRESS PROTECTION

: IP66, NEMA 4X

PROCESS CONTROL SYSTEM

: BS EN ISO 9001

: ISO/IEC 80079-34:2011

HAZARDOUS AREA CLASSIFICATION

ATEX CERTIFICATION No

: SIRA 09ATEX1164X

ATEX CERTIFICATION CODE

II 2 GD Ex e IIC Gb / Ex ta IIIC Da

IEC Ex CERTIFICATION No

: IEC Ex SIR.09.0068X

IEC Ex CERTIFICATION CODE

: Ex e IIC Gb / Ex ta IIIC Da

CSA-Us CERTIFICATION No

: 09.2194053X

CSA-Us CERTIFICATION CODE

: Class I, Div 2 Groups A, B, C, D; Class II, Div 2, Groups E,F,G; Class III, Div 2; Encloxure type 4X;

Ex e II, Class I Zone 1, AEx e II, AEx ta IIC

INSTALLATION INSTRUCTIONS

Installation should only be performed by a competent person using the correct tools. Read all instructions before beginning installation.

INSTALLATION GUIDANCE NOTES

1. In accordance with NEC requirements, connectors with NPT and Metric entry threads are suitable for both Divisions and Zones.

2. In accordance with CEC requirements, connectors with NPT threads are suitable for both Divisions and Zones. Connectors with Metric threads are

only suitable for Zones unless fitted with an approved Metric to NPT thread conversion adaptor.

SPECIAL CONDITIONS FOR SAFE USE

1. Entry component threads may need additional sealing to maintain the ingress protection rating as applicable to the associated equipment in which

it will be attached

2. The cable ranges shall only be used where the temperature, at the point of entry, is in the following ranges:

TMC Types: -60°C to +110°C.

ACCESSORIES

The following accessories are available from CMP Products, as optional extras, to assist with fixing, sealing and earthing :-

Locknut | Earth Tag | Serrated Washer | Entry Thread (I.P.) Sealing Washer