BMR Suspension BK005 User Manual
Page 4
Rear Upper Control Arm Bushing
BK005 (Continued)
15. Using an 18mm wrench and 18mm socket, remove the outer bolt on the upper
control arm. See Image 14 below.
16. Remove the two 18mm bolts at the rear of the upper control arm. See Image 15.
17. Remove the upper control arm.
18. Note the orientation of the rear
bushing saddle on the control arm
before removing the bushing.
Using a 21mm socket, remove the
bushing retainer bolt as shown in
Image 16 above.
19. Using a hydraulic press, remove
the OE bushing from the saddle.
See Image 17.
4
See also other documents in the category BMR Suspension For the car:
- AA016 (2 pages)
- AA017 (1 page)
- AA018 (3 pages)
- AA028 (1 page)
- AA005 (3 pages)
- BCA005 (1 page)
- BK043 (2 pages)
- CCK002 (3 pages)
- RB001 (2 pages)
- RSK001 (1 page)
- RSK007 (2 pages)
- SB035 (3 pages)
- BCA003 (1 page)
- XSB006 (1 page)
- DSL002 (2 pages)
- TCA007 (1 page)
- AWK-1 (1 page)
- PSB001 (1 page)
- TCA018 (1 page)
- BCK003 (4 pages)
- BK046 (4 pages)
- BK006 (1 page)
- BK008 (1 page)
- BK016 (3 pages)
- BK017 (4 pages)
- BK018 (2 pages)
- BK019 (1 page)
- BK024 (4 pages)
- BK026 (4 pages)
- BK027 (5 pages)
- BK029 (4 pages)
- BK039 (4 pages)
- BK040 (3 pages)
- CCK004 (2 pages)
- DSL014 (2 pages)
- DSL015 (1 page)
- DTB004 (1 page)
- ELK004 (1 page)
- ELK005 (1 page)
- ELK006 (1 page)
- ELK009 (1 page)
- ELK011 (1 page)
- MM004 (2 pages)
- MTCA030 (2 pages)
- S5003 (4 pages)