ADTRAN L768 User Manual
Page 92
Chapter 3: Terminal Menu Operation and Structure
76
Express L768/L1.5 User Manual
61202192L1-1
IPX Servers/Hops
- Number of routers that must go through to get to
server. Ranges from 0-15 or 16 for infinite.
IPX Servers/TTL
- Seconds until address is removed from table.
Value of 999 means server is static.
Status/WAN Stats
Read security: 5
This menu contains generic WAN statistics on HDLC hardware port.
HDLC Port
Tx Bytes
- total number of raw bytes sent out HDLC port 1
Rx Bytes
- total number of raw bytes received in HDLC port 1
Rx CRCs
- total number of CRC errors detected on HDLC port 1
Clear Counts
- When activated, clears all WAN stat counts
Status/LAN Stats
Read security: 5
This menu contains statistics for the Ethernet port.
Tx Packets
- Packets transmitted out the Ethernet port
Rx Packets
- Packets received from the Ethernet port
Tx Errors
- Total transmit errors encountered on Ethernet port
Single Collisions
- total single collisions before successful
transmission
Multiple Collisions
- total multiple collisions before successful
transmission
Excessive Collisions
- total collisions that resulted in packet being
dropped
Deferred Transmissions
- total packets deferred due to collisions
Carrier Sense Errors
- total carrier sense errors encountered (no
link integrity)
Rx Errors
- Total packets received in error and dropped
CRCs
- total packets detected with CRC errors
Giants
- total packets received that were greater than 1518 bytes
Runts
- total packets received that were less than 64 bytes
Rx Collisions
- total collision occurred during reception
Clear Counts
- When activated, clears all LAN Stat counts.