Setting of the flow selector – AirSep MN123-1 F User Manual
Page 29

MN123-1 rev F
25
Setting of the Flow Selector
The FreeStyle unit has three pulse flow settings: [1], [2], and [3], providing flows equivalent to 1-3 LPM oxygen. Lift the dust
cover on the unit’s keypad, and press the [1], [2], or [3] button, which corresponds to the oxygen pulse flow that your physician
has prescribed. (See Figures 23 and 24.)
Figure 23: Lifting Dust Cover on Keypad Display
Figure 24: Pressing Flow Selection Button
The Manufacturer recommends an alternate source of supplemental oxygen in the event of a power outage, alarm
condition, or mechanical failure. Consult your physician or Equipment Provider for the type of reserve system required.
It is very important to select only the prescribed level of oxygen. Do not change the flow selection unless you have
been directed to do so by a licensed clinician.
The portable Oxygen Concentrator may be used during sleep under the recommendation of a qualified clinician.