Asante Technologies 35516 - Manual (Page 86)

- 86 -
dot1x radius-server host A.B.C.D
[auth-port <1-65535>] [key
SHARED_KEY_STRING] Defines a RADIUS server and its parameters.
dot1x radius-server key
SHARED_KEY_STRING Sets RADIUS server shared key.
dot1x radius-server nas-identifier
NAS_ID_STRING Sets RADIUS NAS-Identifier attribute.
5.14.2 Interface Configuration Mode Commands
Command Purpose
dot1x multiple-hosts Enables multiple-host mode so that after the interface is
authenticated, it is accessible to all hosts on the port.
no dot1x multiple-hosts Disables multiple-host mode so that after the interface is
authenticated by a host, it is accessible only to that host.
dot1x port-control [auto | force-
authorized | force-unauthorized] Sets the interface to the operating mode below:
auto: interface is subject to 802.1X control
force-authenticated: interface is set to be always
authenticated, so it is accessible to all traffic
force-unauthenticated: interface is set to be
unauthenticated, so it is blocking all traffic
no dot1x port-control Sets 802.1X interface parameters to default values.
show dot1x [detail | parameters | port-
configuration | radius-server] Displays 802.1x information.