Asante Technologies 35516 - Manual (Page 21)

- 21 -
c. Under the Settings tab, choose VT100 for Emulation mode.
d. Select Terminal keys for Function, Arrow, and Ctrl keys. Be sure the setting is for Terminal keys, NOT
Windows keys.
e. Back under the Connect To tab, press the Configuration button.
f. Set the data rate to 9600 Baud.
g. Set data format to 8 data bits, 1 stop bit and no parity.
h. Set flow control to NONE.
Now that terminal is set up correctly, power on the switch. The boot sequence will display in the terminal.
After connecting to the console, a prompt like the following will appear:
User Access Verification
Password:
By default, the initial password for access via console and telnet is Asante (case-sensitive). See the following section
for setting new passwords on the terminal lines.