Asante Technologies 35516 User Manual
Page 45
- 45 -
of the SNMP agent.
4.3.2 Other SNMP Configuration
Command Purpose
snmp-server
Enable the SNMP agent. The first snmp-server global
configuration command enables SNMP.
snmp-server engineID {local engineid-
string|remote host-ip-address [udp-port
port-number] engineid-string}
Set Engine ID for local or remote devices. The remote engine
ID is used to create users that can send SNMPv3 traps.
snmp-server view view-name subtree
[subtree-mask] [included | excluded]
Define the SNMP server view. Currently, the SNMP subtree
can only adopt numbered form. That is, “1.3.6.1.2.1” is valid
but “mib-2” is invalid. The subtree-mask uses colon-
separated hex digits, such as “FF:A0”.
snmp-server group group-name {v1 |
v2c | v3 [auth | noauth |
priv
]}
[read read-view] [write write-view]
[notify notify-view] [access access-
list]
Set SNMP views. The default read-view is “all,” and the
default write-view and notify-view are “none”. (Currently, “v3
priv” is not supported.)
snmp-server user user-name group-
name [remote host-ip-address [udp-
port port-number]] {
v1|v2c
|v3 [auth
{md5 |
sha
} auth-password]}
[encrypted] [access access-list]
Define SNMP server users. (Currently creating “v1|v2” users
and the “sha”(SHA1) algorithm are not supported)
snmp-server enable traps [snmp
authentication | duplicate-ip | station-
move]
Enable SNMP traps. Supported trap types are authentication,
duplicate-ip, and station-move.
snmp-server trap-source interface-
name
Use specified veth’s primary IP address as the source
address when sending traps and informs.
snmp-server trap-timeout seconds
Define how often to resend trap messages. The range is 1–
1000. The default is 30 seconds.
snmp-server queue-length length
Set the message queue length for each trap-host. The range
is 1–1000. The default is 10.
snmp-server contact text
Set the system contact string.
snmp-server location text
Set the system location string.
show snmp
show snmp engineID [local | remote]
show snmp groups
show snmp user
Show various SNMP information.