GE ZV800SJSS User Manual

Page 22

Installation Instructions

UNDER-CABINET INSTALLATION

7 COMPLETE THE INSTALLATION

AND CONNECT DUCTWORK

Drive 2 screws into each side bracket.

Be sure the screws engage the filler blocks

or the cabinet bottom.

3XOOWKHJODVVFDQRS\IRUZDUGWRDFFHVVDQG

install

2 screws through the hood and into the brackets

on both sides.

8VHGXFWWDSHWRVHFXUHWKHGXFWWRWKHH[KDXVW

outlet in the top of the hood. Do not use screws

at this location.

If there is a noticeable gap between the hood and

the bottom of the cabinet on the sides:
Slide canopy forward and install original top screws

through the bottom of the hood and into cabinet

bottom or frame.

NOTE: Install wood filler blocks if necessary to

accept the screws.

Install 2 Screws into

Each Side Bracket

6 MOUNT THE HOOD

Carefully, lift the hood into the cabinet. Guide the

hood upwards to meet the ductwork.

IMPORTANT: One person must hold the hood in

place while the other drives the screws into the

mounting frame.

Install original top screws

Install a wood screw

on each side of the

mounting frame