HP Officejet J6480 All-in-One Printer - Manual (Page 84)

Channel range definitions
The following table lists the 802.11 Wireless channel range definitions.
The first digit stands for Locale Number
Locale 0: Channels 1-11:
• high-power 802.11b
• low-power 802.11g
Locale 1: Channels 1-13:
• low-power 802.11b
• low-power 802.11g
Locale 2: Channels 1-14:
• low-power 802.11b
• low-power 802.11g
NOTE: 802.11g is not allowed on channel 14.
The second digit stands for Ad-Hoc
Compatibility Mode 0: Ad-Hoc connection status nominal
1: Ad-Hoc always appears connected
The third digit stands for Infrastructure Rate
Restriction 0: 802.11b or 802.11g
1: 802.11b only
The fourth digit stands for Ad-Hoc Rate
Restriction 0: 802.11b or 802.11g
1: 802.11b only
Configure network options
You can manage network settings for the device through the device control panel as
described in the next section. Additional advanced settings are available in the
embedded Web server, a configuration and status tool you access from your Web
browser using an existing network connection to the device. For more information, see
Embedded Web server .
This section contains the following topics:
• Change basic network settings
• Change advanced network settings
Change basic network settings
The control-panel options enable you to set up and manage a wireless connection and
to perform a variety of network management tasks. This includes viewing the network
settings, restoring the network defaults, turning the wireless radio on and off, and
changing the network settings.
This section contains the following topics:
• Use the Wireless Setup Wizard
• View and print network settings
• Turn the wireless radio on and off
Chapter 8
80 Configure and manage