Hp smart update manager, Hp uefi system utilities, Using hp uefi system utilities – HP ProLiant DL580 Gen8 Server User Manual
Page 78
Software and configuration utilities 78
For more information or to download SPP, see one of the following pages on the HP website:
•
HP Service Pack for ProLiant download page
•
HP Systems and Server Software Management page
HP Smart Update Manager
HP SUM is a product used to install and update firmware, drivers, and systems software on HP ProLiant
servers. HP SUM provides a GUI and a command-line scriptable interface for deployment of systems software
for single or one-to-many HP ProLiant servers and network-based targets, such as iLOs, OAs, and VC Ethernet
and Fibre Channel modules.
For more information about HP SUM, see the product page on the HP website
To download HP SUM, see the HP website
To access the HP Smart Update Manager User Guide, see the HP SUM Information Library
HP UEFI System Utilities
For servers that support UEFI, the HP UEFI System Utilities is embedded in the system ROM. The UEFI System
Utilities enable you to perform a wide range of configuration activities, including:
•
Configuring system devices and installed options
•
Enabling and disabling system features
•
Displaying system information
•
Selecting the primary boot controller
•
Configuring memory options
•
Selecting a language
•
Launching other pre-boot environments such as the Embedded UEFI Shell and Intelligent Provisioning
For more information on the HP UEFI System Utilities, see the HP UEFI System Utilities User Guide on the HP
website
Using HP UEFI System Utilities
To use the System Utilities, use the following keys:
Action
Key
Access System Utilities
F9 during server POST
Navigate menus
Up and Down arrows
Select items
Enter
Save selections
F10
Access Help for a highlighted configuration option F1
Default configuration settings are applied to the server at one of the following times:
•
Upon the first system power-up