HP ProLiant DL580 Gen8 Server - Manual (Page 52)

Hardware options installation 52
b. Disconnect each power cord from the server.
3. Remove the processor memory drawer shipping screws, if installed. Retain the screws for future use
("
Processor memory drawer shipping screw locations " on page 28 ).
4. Remove the processor memory drawer (on page 28 ).
5. Remove the processor memory drawer cover (on page 29 ).
6. Press the release button, and then lift the handles on the new memory cartridge.
7. Raise the lift tab on the new memory cartridge, and then open the cartridge.
8. Open the DIMM slot latches.