Fbwc module and capacitor pack option – HP ProLiant DL580 Gen8 Server User Manual
Page 65
Hardware options installation 65
7.
Install the expansion board.
8.
Close the expansion slot retainer.
9.
Connect any required internal or external cables to the expansion board.
10.
Install the access panel.
11.
Install the server in the rack.
12.
Connect each power cord to the server.
13.
Connect each power cord to the power source.
14.
Resume normal server operations.
FBWC module and capacitor pack option
CAUTION:
The cache module connector does not use the industry-standard DDR3 mini-DIMMs.
Do not use the controller with cache modules designed for other controller models, because the
controller can malfunction and you can lose data. Also, do not transfer this cache module to an
unsupported controller model, because you can lose data.
To install the component:
1.
Back up all data.
2.
Close all applications.
3.
Power down the server (on page
4.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
CAUTION:
In systems that use external data storage, be sure that the server is the first unit to be
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the drives as failed when the server is powered up.
5.
Extend the server from the rack (on page
6.