HP OmniBook 800 Notebook PC - Manual (Page 8)

Using the Docking System
Understanding the Basics
1-8
Understanding the Basics
This section shows you how to get your docking system and OmniBook up and
running quickly, including how to
♦ Dock the OmniBook.
♦ Undock the OmniBook—including manual override.
♦ Protect the OmniBook with a security cable.
♦ Understand the docking system’s status lights.
To dock the OmniBook
You do not need to turn the OmniBook off when docking.
1. If you’re using Windows 95, go to step 2.
–or–
If you’re using Windows for Workgroups, save your work and exit Windows.
You’ll be rebooting the OmniBook.
2. Plug the power cord into the ac adapter, then into a grounded ac outlet.
3. Plug the connector from the ac adapter into the port on the back of the
docking system.