HP OmniBook 800 Notebook PC - Manual (Page 23)

Using the Docking System
Making Connections
1-23
To connect SCSI devices
SCSI devices are disabled whenever you turn off the system or undock.
1. Make sure that each SCSI device is set to a different SCSI ID number, ID 1
through ID 6. Do not use ID 0. See the device’s documentation for instructions
for checking and changing the device’s ID.
2. Set the SCSI bus termination for each device.
The device at the end of the SCSI bus must be terminated, while the devices in
the middle of the bus must have their terminators removed or disabled. The
device’s documentation describes how to check and change the termination.
3. Connect the peripheral devices to the docking system one after the other—a
“daisy-chain” connection.
4. Plug each SCSI device into a proper electrical outlet. See the device’s
documentation for details.