HP OmniBook 800 Notebook PC - Manual (Page 14)

Using the Docking System
Understanding the Basics
1-14
To attach a security cable
Your docking system has a built-in security connector that allows you to secure the
docking system with a cable. Kensington MicroSaver lock systems work with these
connectors and are available at many computer stores. When a security cable is
attached to the docking system—and an undock password is set—the OmniBook
cannot be undocked without supplying the password. (See the following procedure
for instructions about how to set a docking password.)
1. Wrap the cable around a stationary object, such as a table leg.
2. Loop the cable to create a slip knot around the stationary object—make sure it
can’t slip off.
3. Insert the lock into the docking system’s security connector and release the key.
Store the key in a safe place away from the OmniBook.