HP OmniBook 800 Notebook PC - Manual (Page 25)

Using the Docking System
Making Connections
1-25
To install an ISA or PCI expansion board
You can install one expansion board in the docking system, such as one network
card or one PCI video card.
•
Note that if you install a network board, a network connection is lost whenever
you undock.
•
If you install a video card, see also “Using a Video Card.”
C A U T I O N Before removing the board from its bag, equalize static electricity by touching
the bag and the docking system’s metal back plate at the same time.
Handle the board by its edges. Avoid touching electronic components.
1. Undock the OmniBook and unplug the ac adapter from the docking system.
2. Turn the docking system over and loosen screws in the positions shown. Place
a piece of tape over each inset to hold the screws in place.