HP StoreAll Storage - Manual (Page 20)

NOTE: For the purpose of setting quotas, no UID or GID can exceed 2,147,483,647.
Setting user quotas to zero removes the quotas.
NOTE: When a new NIS user is added, you need to restart the Fusionmanager services before
assigning quotas to the user:
/etc/init.d/ibrix_fusionmanager restart
GUI procedure
To configure a user quota, select the file system where the quotas will be configured. Next, select
Quotas > User Quotas from the lower Navigator, and then, on the User Quota Usage Limits page,
click Set. User quotas can be specified by either the user name or ID. Specifying quota limits is
optional.
To configure a group quota, select the file system where the quotas will be configured. Next, select
Quotas > Group Quotas from the lower Navigator, and then, on the Group Quota Usage Limits
page, click Set. Group quotas can be identified by either the group name or GID. Specifying quota
limits is optional.
To change user or group quotas, select the appropriate user or group on the Quota Usage Limits
page, and then click Modify.
CLI procedure
Use the following commands to set quotas for users and groups:
•
Set a quota for a single user:
20 Setting up quotas