HP ProLiant DL320s Server - Manual (Page 24)

Setup 24
3. Remove the plastic cover from the front of the server.
4. Slide the chassis into the rack.
5. Use the thumbscrews on the front of the chassis to secure it to the rack.
6. Use the shipping bracket to secure the server for shipping:
IMPORTANT: Use of the shipping bracket is required only when the rack is shipped with the
server installed.
a. Loosen the thumbscrew on the shipping bracket.
b. Slide the shipping bracket forward until it engages the chassis.
c. Tighten the thumbscrew.
If you are installing the server into a telco rack, order the appropriate option kit at the RackSolutions
website ( http://www.racksolutions.com/hp ). Follow the server-specific instructions on the website to install
the rack brackets.