HP Deskjet D2680 Printer - Manual (Page 71)

Print cartridges in wrong slot
Solution: Make sure the print cartridges are installed into the correct slots. If they
are, remove and reinsert the print cartridges and verify that they are fully inserted and
locked in place.
To make sure the print cartridges are installed correctly
1. Make sure the product is turned on.
2. Open the print cartridge door.
The print carriage moves to the center of the product.
3. Check to make sure you are using the correct print cartridges for your product.
For more information about compatible print cartridges, see
Order ink supplies
4. Remove the black print cartridge from the slot on the right. Do not touch the ink
nozzles or the copper-colored contacts. Check for possible damage to the copper-
colored contacts or ink nozzles.
Make sure the clear plastic tape has been removed. If it is still covering the ink
nozzles, gently remove the clear plastic tape by using the pink pull tab. Make sure
you do not remove the copper colored tape containing the electrical contacts.
1 Copper-colored contacts
2 Plastic tape with pink pull tab (must be removed before installing)
3 Ink nozzles under tape
Errors 69
Solve a problem