Printouts seem blurry or fuzzy, Solution 6: contact hp support – HP Deskjet D2680 Printer User Manual

Page 50

plan to use immediately. When you have finished printing, return any unused photo
paper to the plastic bag. This will prevent the photo paper from curling.
For more information, see:

•

Load media

•

Recommended papers for printing

Cause: The wrong kind of paper was loaded in the input tray.
If this did not solve the issue, try the next solution.

Solution 5: Automatically clean the print cartridges.

Solution: Clean the print cartridges.
For more information, see

Automatically clean print cartridges

Cause: The print cartridge nozzles needed to be cleaned.
If this did not solve the issue, try the next solution.

Solution 6: Contact HP support

Solution: Contact HP support for service.

Go to:

www.hp.com/support

If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Cause: There was a problem with the printhead.

Printouts seem blurry or fuzzy

Try the following solutions if your printout is not sharp or unclear.

NOTE:

For this issue, there is not a problem with your ink supplies. Therefore,

replacing the ink cartridges or printhead is not necessary.

TIP:

After reviewing the solutions in this section, you can go to HP's Web site to see

if there is additional troubleshooting help. For more information, go to:

www.hp.com/

support

•

Solution 1: Check the print settings