Diagnosis log tab – HP Insight Diagnostics Software User Manual
Page 26
The following are the types of logs included in the Log tab:
•
Diagnosis Log displays the following details on the tested devices after Diagnose completes:
The pass/fail status
◦
◦
The list of devices diagnosed
◦
The number of times Diagnose ran
◦
The number of times the test failed
◦
The number of times the test passed
◦
The time it took to run Diagnose on each device during the last execution
•
Test Log (available only in HP Insight Diagnostics Offline Edition) displays detailed offline test
information.
•
Error Log displays the tests that have failed during the offline testing.
•
Integrated Management Log displays POST errors and diagnostic errors. The IML records
system events, critical errors, power-on messages, memory errors, and any catastrophic
hardware or software errors that typically cause a system to fail. The IML enables the
manipulation of this data.
•
The System Event Log (SEL) records events relating to system sensors.
NOTE:
Starting HP Insight Diagnostics Online Edition 9.4 and later, the feature clearing HP
Insight Diagnostics logs is intended for the SMH Administrators to conform to the SMH security
model. Consequently, non SMH administrator user, including the anonymous user, are not allowed
to clear any of the Insight Diagnostics logs and other administrator specific features. For more
information about the SMH security model and user groups, see the Security section in the HP
System Management Homepage User Guide available at
.
Diagnosis Log tab
Detailed diagnosis results appear in the Diagnosis Log on the Log tab.
The Diagnosis Log displays the following information:
•
The status indicator for each power supply or logical volume diagnosed
•
The specific power supply or logical volume diagnosed
•
The number of times the diagnostic test was run
•
The number of times the diagnostic test failed
•
The time required to complete the diagnostic test
To clear the content of the Diagnosis Log, click Clear Logs. Ensure that the Clear Diagnosis Log
option is selected, and then click OK.
To save the Diagnose Log to an HTML file onto a storage device such as a USB disk or diskette,
click Save Logs and select the appropriate option as shown in the
. The default
option for Save Logs allows you to save all logs across the log tabs. If you want to save just the
log type, make sure you select Save Diagnosis Logs, and then click OK.
26
Using HP Insight Diagnostics