HP Insight Diagnostics Software - Manual (Page 19)

•
Operating System displays information on the OS, when run in online mode.
•
Remote Management (if supported on system) displays information about iLO.
•
Resources displays information about the system resources, real-time clock, and operating
system settings for certain settings, such as I/O and IRQs.
•
Storage displays information about the storage controllers and storage media connected
to the system, including hard drives, diskette drives, and optical drives. It also shows
logical volume information for all connected hard drives.
•
System displays information about the system ROM, product type, processor type and
speed, and coprocessor.
7. Click View Comparison Results.
8. Click Current Configuration to return to the current configuration information.
9. Click Print to print the configuration comparison details.
10. Click Save to save the configuration comparison details to a file.
Figure 8 Survey tab – Compare configurations
Using the Diagnose tab
The HP Insight Diagnostics Diagnose feature performs diagnosis on the following devices:
•
Hard drives attached to an HP Smart Array Controller
•
Power supplies that are deemed diagnosable
To start a diagnostic test:
1.
Click Diagnose tab.
2. Select the device to diagnose:
•
Select All Devices to assess the health of all logical volumes and power supplies.
•
Select one or more specific logical volumes or power supplies to assess the health of the
selected devices.
3. Click Diagnose.
Using the Diagnose tab 19