HP Photosmart 3310 All-in-One Printer - Manual (Page 79)

Change memory card or storage device security
The
Memory Card Security option on the Advanced Setup menu enables you to set
the HP All-in-One so that it does not share memory card (and other storage device)
data with computers on a wireless network. However, we do not recommend this
security method for your memory card because it prevents you from accessing your
memory card from your computer. Also, this feature does not work on an Ethernet
network or a USB connection. All computers on an Ethernet network can access the
memory card on a HP All-in-One connected to the network.
If you want security for your memory card, HP recommends using WEP or WPA-PSK
security on your network. To change the security settings for your network, you can
use the Embedded Web Server that came with your HP All-in-One. For information,
see
Use the Embedded Web Server . In addition, see the documentation that came
with your access point.
Use the Embedded Web Server
If your computer is connected to an HP All-in-One on a network, you can access the
Embedded Web Server that resides in the HP All-in-One. The Embedded Web Server
is a web-based user interface that provides some options not available on the HP All-
in-One control panel, including advanced network security options. Also, the
Embedded Web Server enables you to monitor status and order printer supplies.
For information on how to use the features available in the Embedded Web Server,
see the onscreen help within the Embedded Web Server. To access Embedded Web
Server help, open the Embedded Web Server, then click the
Help link under Other
Links on the Embedded Web Server Home tab.
Note Only use the Embedded Web Server to change network settings if you
cannot access the HP All-in-One control panel, or you need to change an
advanced option not available on the control panel.
Access the Embedded Web Server
You can only access the Embedded Web Server on a computer connected to an
HP All-in-One on a network.
1.
Press Setup .
2. Press until Network is highlighted, then press OK .
The Network Menu appears.
3. Press 1 , then press 1 again.
This selects the Network Settings menu and then prints a configuration page for
your HP All-in-One, including the IP address. You will use the IP address in the
next step.
4. In the Address box in your Web browser on your computer, type the IP address
of the HP All-in-One, as shown on the network configuration page. For example,
http://192.168.1.101.
The Embedded Web Server
Home page appears, showing information for the
HP All-in-One.
Chapter 4
76 HP Photosmart 3300 All-in-One series
Netw
ork
setup