HP Photosmart 3310 All-in-One Printer - Manual (Page 76)

The Setup Menu appears.
3. Press until Network is highlighted, then press OK .
The Network Menu appears.
4. Press 4 .
This runs the Wireless Setup Wizard . For more information, see Connect to a
wireless infrastructure network .
5. Run the installation CD, then choose the network installation. For more
information, see
Install the software for a network connection .
6. (Windows only) When the installation is complete, open Printers and Faxes in
the Control Panel and delete the printers for the USB installation.
To change a USB connection to a wired (Ethernet) connection
1.
Unplug the USB connection from the back of your HP All-in-One.
2. Connect an Ethernet cable from the Ethernet port on the back of the HP All-in-
One to an available Ethernet port on the router, switch, or access point.
3. Run the installation CD, then choose the network installation. For more
information, see
Install the software for a network connection .
4. (Windows only) When the installation is complete, open Printers and Faxes in
the Control Panel and delete the printers for the USB installation.
Manage your network settings
You can manage network settings for the HP All-in-One through the HP All-in-One
control panel as described in the next section. Additional advanced settings are
available in the Embedded Web Server, a configuration and status tool you access
from your Web browser using an existing network connection to the HP All-in-One.
For more information, see
Use the Embedded Web Server .
Change basic network settings from the control panel
The HP All-in-One control panel enables you to set up and manage a wireless
connection and to perform a variety of network management tasks. This includes
viewing the network settings, restoring the network defaults, turning the wireless radio
on and off, and changing the network settings.
Use the Wireless Setup Wizard
The Wireless Setup Wizard provides an easy way to set up and manage a wireless
connection to your HP All-in-One. For more information on setting up a wireless
connection, see
Wireless infrastructure network setup or Wireless ad hoc network setup .
1. Press Setup .
2. Press until Network is highlighted, then press OK .
The Network Menu appears.
3. Press 4 .
This selects Wireless Setup Wizard .
User Guide 73
Network setup