Connection information, Supported connection types, Connection – HP Photosmart 3310 All-in-One Printer User Manual
Page 32: Information
Note
If you select
Off
, you will not hear a dial tone, fax tones, or
incoming ring tones. With the
Ring and Beep Volume
set to
Off
, you
cannot send a fax using monitor dialing, such as when using a calling card
to send a fax. For more information on monitor dialing, see
4.
Press
OK
.
Connection information
Your HP All-in-One comes equipped with a USB port so you can connect directly to a
computer using a USB cable. You can also connect your HP All-in-One to either a
wired or wireless network. If you insert an HP bt300 or HP bt400 series Bluetooth
®
Wireless Printer Adapter into the front USB port, Bluetooth
®
devices such as PDAs
and camera phones can print to your HP All-in-One.
Note
In the remainder of this chapter, the HP bt300 or HP bt400 series
Bluetooth
®
Wireless Printer Adapter is referred to simply as an HP Bluetooth
®
adapter.
Supported connection types
Description
Recommended
number of
connected
computers for best
performance
Supported software
features
Setup instructions
USB connection
One computer
connected with a
USB cable to the
USB port on the back
of the HP All-in-One.
All features are
supported.
Follow the Setup
Guide for detailed
instructions.
Ethernet (wired)
connection
Up to five computers
connected to an
HP All-in-One using a
hub or router.
All features are
supported.
Follow the Setup
Guide and
in this
User Guide for
detailed instructions.
802.11b or g
(wireless) connection
Up to five computers
connected using an
access point.
(infrastructure mode)
All features are
supported
Follow the Setup
Guide and
in this
User Guide for
detailed instructions.
User Guide
29
Finish
setup